Fasteners

3/8 - 16 x 3/4" 'P' Thumb Screw Plain (Box of 50)

Thumb Screws are made to be tightened and loosened with finger pressure and are typically used where frequent adjustment or disassembly is required. They are fully threaded. Length of Spade Head (Type P) screws is measured from under the head to the tip...

3/8 - 16 Twirl Nut (Sold as Each)

Thread Size = 3/8-16 Nut Thickness = 3/8" Pull-Out Strength = 1100 lbs Slip Strength = 800 lbs

3/8" Square Strut Washer Plated (Sold as Each)

7/16" hole X 1-5/8 square X 1/4 thick

1/4-20 Flat End Eye Hanger Zinc (Box of 10)

These hangers have internal threads for use with threaded rods, bolts, and anchors. They’re zinc plated for corrosion resistance in wet environments.  

Phillips Pan Head Machine Screws Zinc Plated

Machine screws are threaded fasteners designed for use with tapped holes or nuts. Typically smaller than bolts, they feature a uniform, fully threaded shaft and a defined head, facilitating precise fastening in machinery and appliances. Commonly...

1/4-20 Flat End Eye Hanger Zinc (Box of 100)

These hangers have internal threads for use with threaded rods, bolts, and anchors. They’re zinc plated for corrosion resistance in wet environments.  

Phil Flat Head Thread-Forming Hi-Lo Screws

Flat Phillips Hi-Lo Screws for Brittle Plastic or Soft Material Screws are beveled under the head for use in countersunk holes. Alternating high and low threads minimize cracking and splitting in brittle material such as phenolic and glass-filled plastic...

Screw Nails

Nail with a screw thread to increase its holding power, also know as a sprial shank nail.

10-24 X 3/8 Slot Hex Head Zinc Plated Green (Box of 25)

Box of 25   The green color identifies these as grounding screws. They have Type F threads that cut threads in metal. The slotted, one-piece hex washer head provides a large flat bearing surface for making solid electrical connections. Made...

1/4-20 x 3/4 UnSlotted H/W Zinc Plated Swageform® (Box of 10)

Box of 10. 1/4-20 x 3/4 UnSlotted H/W Zinc Plated Swageform® Swageform® Is THE High Performance Threadforming Screw. Swageform® thread forming screws have been superior performers in automotive, industrial, and consumer assembles for over 25...

14 x 1 Round Head Screw Nail Zinc Plated (100 per Box)

Nail with a screw thread to increase its holding power, also know as a sprial shank nail.

1/2-13 Finished Hex Nut Zinc Plated (Box of 50)